Whether you live in an area that is prone to drought or whether you just want to take more responsibility for the effect that we can all have on the natural environment, saving water is essential these days, especially in the warmer summer months when it can be quite scarce. If you’re determined to find the best ways to save water in your home, here are some useful tips to help you to save as much as possible.
Limit Your Toilet Flush
If water is very scarce in the area where you live, or you want to save as much water as possible, you can restrict the number of times you flush your toilet during the day. There is no need to flush every time unless the toilet is dirty, so this will help to prevent you wasting water. If you don’t like the idea of leaving waste in your toilet, you could reduce the size of your flush instead. By putting a heavy item like a brick inside your cistern, you can reduce the amount of water released in each flush to save natural resources.
Only Wash Dishes When Necessary
If you only have a couple of small plates or a bowl and spoon to wash up, don’t bother running the tap or filling up the sink. You should wait until you have a large pile of dishes to wash at the end of each day so that you can do it all in one go with just a single sink-full of water. This will save a lot of water. You should also make sure that you only wash dishes in a full sink or bowl of water rather than under a running tap as that is also a waste of water. If you use a plastic washing up bowl, you can then use the water that you have used to wash the dishes for other purposes, such as watering the lawn. It is more economical to run a dishwasher than to fill up a sink, so if you have a dishwasher, you should make sure to wash all your dishes using that method, on the eco setting if your machine has one. Only run your machine once the load is full however.
Fix Any Leaks
If you have a leaky pipe, running toilet or dripping tap anywhere in your home, now is the time to get it fixed. You can either fix it yourself by replacing the washer, or alternatively, call in a plumber to help resolve the problem. This will help to save a lot of wasted water.
Wash A Full Load
Unfortunately, you can’t avoid washing your clothes, but you can avoid running the washing machine half empty. Always wait until you have a full load before you switch the machine on, and choose a lower or economy setting so that you can save on water.
Avoid Showering At Home
If you want to save on your own water bill, you could always try showering at other locations that you are using. For example, if you are going swimming or using the gym, you could use the showers at the sports center, and if you are going to the beach, you could take advantage of the showers there to get clean without using your own resources.
Use A Water Saving Shower Head
While we wouldn’t advise avoiding showering completely, it’s important to realize just how much water can be wasted when washing. Although choosing a shower over a bath is more economical when it comes to natural resources, using a standard shower head causes a lot of water to be lost down the drain. There are a couple of things that you can do to limit the amount of water you use in the shower. Firstly, you should try to restrict the amount of time you spend in the shower to one or two minutes wherever possible.
If you have a digital or remote controlled shower, you can set the timer on your unit so that it switches off automatically after a pre-determined time so that you won’t accidentally spend too long under the running water. You can also purchase a water saving shower head which will help to cut down on the amount of water that comes out when you turn the water on. These shower heads have been designed with a spray pattern that lowers the water flow while still ensuring that you have enough water to wash in. You won’t notice that you’re using less water, but your water bill will see the impact.
Which are the best shower heads for reducing the amount of water you use? Here are some low flow options that are highly rated among consumers:
High Sierra 1.5 GPM
This best selling option has a flow rate of 1.5 GPM and has an impressive integrated system which features a cone restrictor to lower the amount of water used minimizing overspray and pushing the water into a particular spray zone. Despite its low water usage, this shower head produces a surprisingly powerful flow and its fittings and head are made from high quality plastic and durable brass for a long lifespan.
This quality low flow shower head from Delta uses a modified flow channel to push the water into a single dense stream. Its H2O Kinetic system allows droplets to be formed into waves to create the sensation of an intense, full flow that belies the low water usage capacity. The side valve is designed to switch the rate of water flow between 2.0 GPM and 1.5 GPM so it is possible for the user to customize the pressure to best suit their preferences. Affordable and attractive, this is a great shower head for any home.
If you need some advice to choose the right water saving shower head for your bathroom, you can find plenty of helpful information online. You can find out more about the different options on the market today and discover the features and specifications that you most need to achieve an enjoyable yet economical showering experience.